Transponder Module

VT-01 – Our two-block Mode-S Transponder. Install as single block or two block system. Best solution for club fleet installations or installation in different aircraft installation cradle provides tool-less move of the central unit integral alticoder (100ft or 25 ft resolution) Installation in small panels with less space Output power: min. 220 Watt (Class-1), or min. 150 Watt (Class-2) Level 2es (extended Squitter) ADS-B out capable (non certified SIL=0/SDA=0) Direct-GPS NMEA Interface for ADS-B out, no Interface required Ultra low power current, no external cooling required CAN-Bus Interface for future applications (i.e. TIS) COMM-A/B Interface via CAN-Bus Technical Details: Mode-S transponder Available in 2 versions: class 1: 250 W, up to 35000 ft, ≤ 250 kt class 2: 150 W, up to 15000 ft, ≤ 175 kt ETSO certified Integrated altitude encoder Ultra compact: 60 mm (W) x 60 mm (H) Mounts into 2-1/4\” instrument hole Installation: The VT-01 main unit is normally installed using our VT-01 Mounting-Rack Wiring: The VT-01 requires a wiring harness from steering unit to main unit. Its a standard D-SUB Harness. If you purchase our mounting kit, all required connectors and small parts are included. Besides that you will need a power supply cable. Again its standard D-Sub so you can create an own one or use our finished product VT-0103-2. In addition to the connectors a data cable is required. We offer a certified datacable at reasonable prices, you can select any required length meter-wise (GAV-4709-0005A) Typical VT-01 Installation: – main unit (VT0102) – control head/steering unit (VT-0101) – Mounting Rack (VT-0103-1) – Connection Kit/Power supply cable (VT-0103-2) – Datacable (GAV-4709-0005A)